Surge Protective Device

  • Charging pile (station) SPD
  • Charging pile (station) SPD

Charging pile (station) SPD

Type T2 AC power supply lightning protection device belongs to the surge protector installed in the charging pile (station) AC power supply test, used for discharging, reduce the overvoltage due to internal lightning or grid system, thereby reducing the charging pile (station) damage and new energy equipment.

TUV authentication

Product features

1. The high efficient varistor is used, and the response time is fast.

2. The T2 type protection used in the charging pile (station) distribution system.

3. through the YUV certification; type 4, hot swappable module design;

4. The alarm contact with remote signal is convenient for remote monitoring of the state of the protector.

5. the discharge current is large and the residual pressure is low.

6. the standard 35mm rail installation all;

7. The installation is convenient and the maintenance is simple.

Technical data

Electrical parameterstechnical data
Maximum continuous operating voltage Uc(V~)385
Nominal discharge current(8/20us)20
Maximum discharge current(8/20us)40
Protection level Up(kV)<1.8
response time(ns)≤25
General parameters
Outer size (width * height * depth)(mm)36X90X65
Intercepting area of access wire(mm²)≥6
Access ground intercepting area(mm²)≥10
Shell protection gradeIP20
work environment-40~+70℃,relative humidity<(25℃以下)
telecommunication equipment11.14 Normally open;11.12 Normally closed
top

LEAVE A MESSAGE

Contact us!
We're not around but we still want to hear from you! Leave us a note:

* indicates a required field