LT-40E AC SPD,single phase two poles, D
The surge protection device belongs to T2 AC power surge protector,which is installed between the power supply network and the equipment to drain,suppress and reduce the overcurrent and overvoltage caused by induced lightning strikes or the power grid system,so as to reduce the harm to the electrical equipment
Characteristit
Location of Use:sub-distribution cabinet,JP cabinet etc.
Network Systems:TN-S,TN-C,TT
Mode of Protection:N-PE、L-N
Protective Elements:High Energy MOV、GDT
Chinese Standard:GB/T 18802.11-2020
IEC standard:IEC 61643-11:2011
European standard:EN 61643-11:2012
Certificates:CE
Technical Data
| Max Continuous Operating Voltage | Uc(L-N) | 275VAC |
| Max Continuous Operating Voltage | Uc(N-PE) | 255VAC |
| Rated Voltage | Un | 220VAC |
| Nominal discharge current (T2) | In | 20kA |
| Maximum discharge current | Imax | 40kA |
| Protection level | Up(L-N) | 1.5kV |
| Protection level | Up(N-PE) | 1.3kV |
| Follow Current Interrupt Rating | Ifi | 100A(N-PE) |
| Response Time | tA | 25ns |
| SPD Special disconnector | Recommend | LT-SSD40 |
| TOV | N-PE | 1200V |
| Pesidual current-Leakage current at | lpe | NONE |
| Admissible short-circuit curren | Isccr | 25000A |
| Remote communication | With | |
| Damote communication connection | 1411:NO,1112:NC | |
| Remote contact rated current | 220V/0.5A | |
| Associated disconnectors | |
| Thermal | Disconnector internal |
Mechnical characteristics
| Connection By screw terminals | 4-16 mm² |
| Terminal Screw Torque | 2.0 Nm |
| Recommended Cable cross Section | ≥10mm² |
| Insert wire lengtr | 15mm |
| Mounting DIN rail | 35mm(EN60715) |
| Degree of Protection | IP20 |
| Housing | PBT/PA |
| Flame retardant grade | UL94 V⁰ |
| Operating temperature | -40℃~+70℃ |
| Operating relative humidity | 5%-95% |
| Working atmospheric pressure | 70kPa～106kPa |
Size
| Poles | 1P | 1+NPE | 2P | 3P | 4P | 3+NPE |
| Size (mm) | / | 18×83×67 | / | / | / | / |
| Packing | Inner box | |||||
| Deliyery packaging | Carton or Pallet | |||||
Dimensional drawing
