Surge Protective Device

  • LT-T15/B+C T1+T2 SPD in distribution or JP cabinet
  • LT-T15/B+C T1+T2 SPD in distribution or JP cabinet

LT-T15/B+C T1+T2 SPD in distribution or JP cabinet

The surge protection device belongs to T1+T2+T3 AC power surge protector,which is installed between the power supply network and the equipment,suppress and reduce the overcurrent and overvoltage caused by induced lightning strikes or the power grid system,so as to reduce the harm to the electrical equipment

Characteristic

Location  of  Use:sub-distribution  cabinet,JP cabinet  etc.

 Network    Systems:TN-S,TN-C,TT

Mode   of   Protection:L-PE,N-PE,L-PEN,L-N

Protective  Elements:High  Energy  MOV

Chinese Standard:GB/T 18802.11-2020
IEC standard:IEC 61643-11:2011
European standard:EN 61643-11:2012

Certificates:CE

Technical DataL-NN-PE
Max Continuous Operating Voltage(AC)Uc275V275V275V255V
Rated Voltage(AC)Un220V220V220V220V
Maximum impact current(T1)imp6.25kA8kA12.5 kA25 kA
Nominal discharge current(T2)In6.25kA8kA12.5 kA25kA
Open circuit voltage(T3)Uoc20 kV20 kV20 kV20 kV
Protection levelUp1.25kV1.25kV1.25kV1.5kV
Eolow Current Interrupt RatingIfi300A300A300A100A
Response TimetA25ns25ns25ns100ns
SPD Special disconnectorRecommendLT-SSD15X
TOVN-PE1200V
Residual current-Leakage current atlpeNONE
Remote communicationWith
Remote communication connection14 11:NO,1112:NC
Remote contact rated current220V/0.5A
Associated  disconnector
Thermaldisconnector    internal

Mechnical characteristics

Connection By screw terminals6-25  mm²
Terminal Screw Torque2.5 Nm
Recommended Cable cross Section≥16mm²
Insert wire length15mm
Mounting DIN rail35mm(EN60715)
Degree of ProtectionIP20
HousingPBT/PA
Flame retardant gradeUL94 V0
Operating temperature-40℃~+70℃
Operating relative humidity5%-95%
Working atmospheric pressure70kPa ~106kPa

Size

Poles1P1+NPE2P3P4P3+NPE
Size  (mm)18×90×6736×90×6736×90×6754×90×6772×90×6772×90×67
PackingInner box
Delivery packagingCarton or Pallet

Dimensional drawing

top

LEAVE A MESSAGE

Contact us!
We're not around but we still want to hear from you! Leave us a note:

* indicates a required field