LT-25T T1+T2 Wind power surge protection device
Characteristic
Location of Use: main distribution cabinet, JP cabinet etc. Rated Voltage Systems: TN-S, TN-C, TT
Mode of Protection： L-PE, N-PE, L-N
Protective Elements: High Energy Graphite
Chinese Standard: GB/T 18802.11-2020
IECstandard: IEC61643-11:2011
European standard： EN 61643-11： 2011 Certificates: TUV, CE, CQC
Technical Dara
Max Continuous Operating Voltage | (AC) Uc | 275V | 320V | 385V | 440V |
Rated Voltage | (AC) Un | 220V | 220V | 220V | 220V |
Maximum impact current(T1) | limp | 15kA | 15kA | 15kA | 15kA |
Protection level | Up(L-N) | 1.2 kV | 1.4kV | 1.6kV | 2.0kV |
Protection level | Up(N-PE) | 1.6kV | 1.6kV | 1.6kV | 1.6kV |
Follow Current Interrupt Rating | 300A | ||||
Response Time | tA | 25ns | |||
Back up fuse | LT-SSD15X | ||||
TOV | N-PE | 1200V | |||
Residual current-Leakage current at Uc | lpe | NONE | |||
Admissible short-circuit current | Isccr | 50000A | |||
Remote communication | With | ||||
Remote communication connection | 1411:NO,1112:NC | ||||
Remote contact rated current | 220V/0.5A | ||||
Associated disconnectors
Thermal disconnector | internal |
ground fault breaker | None |
Mechnical characteristics
Connection | By screw terminals:6-25 mm² |
Terminal Screw Torque | 2.5 Nm |
Recommended Cable cross Section | ≥16mm2 |
Insert wire length | 15mm |
Mounting | DIN rail 35mm(EN60715) |
Degree of Protection | IP20 |
Housing | PS |
Flame retardant grade | UL94 V0 |
Operating temperature | 40℃~+70℃ |
Operating relative humidity | 5%-95% |
Working atmospheric pressure | 70kPa～ 106kPa |
Size
| Poles | 1P | 1+NPE | 2P | 3P | 4P | 3+NPE |
| Size(mm) | 36×90×72 | 72×90×72 | 72×90×72 | 108×90×72 | 144×90×72 | 144×90×72 |
| Packing | Inner box | |||||
| Delivery packaging | Carton or Pallet | |||||
Dimensional drawing
